Posted on October 11 2017
Ever wondered how to get a gloss coat on an epoxy? There's a few steps but it can be done. :-Get the right epoxy, water clear uv resistant. When doing the finish coat use a heat source (chefs blow torch works well) and wave ABOVE not on the coat, this will get rid of most of your bubbles in your finish coat. Then it's lots of sanding start with say 320grit and work your way up to at 1200grit (the higher you go the better finish). Then use the right buffing compound, ours is made for Fiberglass and resin and can be used with all epoxies and poly resins. Try it out and see the difference.