Fused Carbon Thick Stripe uni tape 90mm- per metre
Ever wondered how to reduce the lump made from Carbon tapes? The answer is finally here! Non woven Carbon Uni tapes!
What is it? Non woven Carbon Tape is a surface veil that has been fused with Carbon Tow! This tape lies flat like a piece of paper (but thinner!) and does not have a raised edge as some woven tapes can. The web-like surface veil(which is transparent in resin) lets the resin bond strongly to the Carbon and the Fiberglass layer above giving it a high strength to weight ratio. Very stable cloth so customisation can be achieved.
So if you are after a super light surfboard swap your woven tape out with a Non Woven Carbon Uni Tape.
How to use:
Reinforce surfboard tails or strengthen the stringer area on the bottom or the deck of your surfboard
Apply onto the core of the board then lam your fibreglass cloth onto the blank as per normal, please be aware the tape can not be curved like a woven tape, make sure you use as a straight tape.
Available in 45mm tape, 90mm tape and 225mm deck inlays