Mica Metallic Powder Pigment - Breen
This powder is for Artists and Surfboard makers who want a bit of sparkle!
Our mica powder is an organic and finely grinded stone from the mineral mica. Mica's are non-toxic and naturally occur from the minerals muscovite and silicate. Mica is crushed into smaller than 20 microns, gives a satiny appearance while providing a sparkly effect. This powder is then coated with various Oxides, carmine and titanium dioxide to give a full range of colours. Making the particles safe. This process is not merely mixing the two together, but instead is a fusing through heat and pressure. This permanently bonds the pigments onto the surface of each mica particle.
We carry over 50 colours!
How to mix into your resin:
Start by measuring the amount of Part A and Part B of your Resin.
Surfset 2:1 ratio Keyline 2:1 ratio Key Cast Art Resin 1:1 ratio
Newkem Poly Resin add 1% catalyst
Mix the solution thoroughly as per resin recommendations. Scrape the resin off of the bottom and sides of the container as you go to fully incorporate both parts.
- Mix the solution thoroughly as per resin recommendations. Scrape the resin off of the bottom and sides of the container as you go to fully incorporate both parts.
- Next, add a pinch of mica powder at a time and stir to combine it well. Scrape the sides and bottom of your mixing cup just like you do when combining the resin. Start with a tiny amount and add a little at a time until you get the exact shade you are looking for.
- At this point your resin is coloured to your liking and ready to pour.
Size of jar is 60ml